Skip to main content
Video s3
    Details
    Presenter(s)
    Sharmistha Bhadra Headshot
    Display Name
    Sharmistha Bhadra
    Affiliation
    Affiliation
    McGill University
    Country
    Author(s)
    Display Name
    Sean Romanuik
    Affiliation
    Affiliation
    McGill University
    Display Name
    Bishakh Rout
    Affiliation
    Affiliation
    McGill University
    Affiliation
    Affiliation
    McGill University
    Display Name
    Sharmistha Bhadra
    Affiliation
    Affiliation
    McGill University
    Abstract

    The traditional design of solution processed single-walled carbon nanotube (SWCNT) thin film transistors (TFTs) suffers from high leakage currents and are prone to dielectric breakdowns. We report the proof of concept of an improved structure for a solution processed SWCNT based TFT. The improved structure TFT has 11,429 times lower gate leakage current than a traditional design TFT of the same dimensions in the on state and exhibits no dielectric breakdown. The gate leakage current in the improved structure is reduced and the dielectric breakdown is resolved by a simple patterning of the SWCNT layer and increasing the thickness of the dielectric layer. In order to take advantage of solution based fabrication techniques, the active layer and the electrodes are fabricated by solution based depositions. The improved structure TFT has a mobility of 0.3 cm2/ V. s and an on/off ratio of approximately 2640. The mobility and on/off ratio can be further improved by increasing the incubation time in the SWCNT solution. In the future, all layers of this structure will be printed and the TFT will be miniaturized, to produce entirely printed SWCNT TFTs and circuits.

    Slides
    • Resolving Unusual Gate Current and Dielectric Breakdown of Solution Processed Carbon Nanotube Thin Film Transistor (application/pdf)